- 75mm Flat Hook Specifications
- Webbing and Anchor Point Compatibility
- Applications in Cargo Restraint
- Material and Surface Finish Requirements
- Product Documentation and Quality Requirements
- Bulk Orders and Custom Flat Hook Requirements
- Frequently Asked Questions
- What is a 75mm flat hook used for?
- Is a 75mm flat hook the same as a 3-inch flat hook?
- Can a 75mm flat hook be used with 50mm webbing?
- What is the breaking strength of this flat hook?
- Is breaking strength the same as working load limit?
- Can I request flat hooks made to my drawing?
- What information should I send to get a quotation?
- Request a 75mm Flat Hook Quotation
An Thanh is a flat hook manufacturer in Vietnam, producing 75mm flat hooks for ratchet tie-down straps for domestic and export markets. Designed to connect 75mm webbing to compatible cargo anchor points, these fittings serve strap manufacturers, distributors and industrial buyers. Contact our factory with your drawing or reference sample, load requirements, order quantity and delivery destination to request product specifications and a tailored export quotation.
75mm flat hook supplier AnThanhTech VietNam
75mm Flat Hook Specifications
A 75mm flat hook is a metal end fitting used in a cargo tie-down assembly. Its webbing slot accommodates the strap, while the hooked end connects to a suitable anchor point.
Correct selection depends on the complete fitting geometry and verified rating - not webbing width alone.
| Specification | Product Details |
|---|---|
| Product name | 75mm Flat Hook |
| Product category | Cargo restraint hardware |
| Brand | An Thanh Tech |
| Intended webbing width | 75mm |
| Material | Alloy steel; grade to be confirmed for the selected model |
| Surface finish | Confirm the required coating and available options |
| Slot width and hook opening | Refer to the approved product drawing |
| Thickness and overall dimensions | Confirm against the selected model |
| Breaking strength | Request the model-specific rating and supporting documentation |
| Working load limit | Confirm the applicable rating and conditions of use |
| Intended use | Compatible cargo tie-down assemblies |
| Price and availability | Request a quotation |
Provide your dimensional and performance requirements when ordering so the proposed fitting can be checked against your application.
Webbing and Anchor Point Compatibility
Before purchasing a flat hook for 75mm webbing, check how it interfaces with the strap, the anchor point and the finished restraint assembly.
Fit for 75mm Webbing
Review the webbing slot width, strap thickness and attachment construction. The webbing should fit the intended assembly without being forced, folded or pinched.
For replacement parts, supply a dimensioned drawing or a measured sample. Two hooks with a similar appearance may have different openings, thicknesses or load ratings.
Compatible Anchor Points
The hook profile must match the intended anchor point. Confirm the opening, depth and seating arrangement in the planned direction of loading.
Do not assume compatibility with every trailer rail, container attachment or cargo track. A photograph can help explain the application, but a drawing with dimensions provides a stronger basis for checking fit.
Complete Tie-Down Assembly Requirements
The hook works together with the webbing, tensioning device, stitching and other fittings. The rating of one component does not establish the working load limit of the complete assembly.
When requesting a quotation, state whether your load requirement applies to the individual hook or the finished tie-down strap.
Flat hook for 75mm webbing supplier in Vietnam
Applications in Cargo Restraint
When matched to suitable anchor points and incorporated into a correctly rated assembly, 75mm flat hooks can be used in cargo restraint systems for:
-
Truck and trailer transport.
-
Industrial equipment deliveries.
-
Manufactured goods and construction materials.
-
New production of compatible tie-down straps.
-
Replacement of fittings in approved restraint assemblies.
The appropriate configuration depends on the cargo, anchor geometry and restraint arrangement. Cargo tie-down hardware should not be assumed suitable for lifting applications.
Material and Surface Finish Requirements
Material and coating specifications should reflect the intended operating environment.
For outdoor or frequently wet conditions, describe the expected exposure when requesting a quotation. Where salt exposure or corrosion resistance is a purchasing requirement, specify the coating, test method and acceptance criteria.
The colour or appearance of a finish does not establish its corrosion performance. Ask for confirmation of the actual surface treatment and any supporting test documentation available for the selected product.
For repeat purchasing, include the agreed material and finish in the approved specification.
75mm flat hook attached to cargo tie-down webbing - An Thanh Tech
Product Documentation and Quality Requirements
Buyers evaluating a 75mm flat hook supplier need information that supports both product selection and incoming inspection.
Discuss the following requirements with An Thanh before placing an order:
| Documentation or Requirement | What to Confirm |
|---|---|
| Product identification | Part number and approved configuration |
| Dimensioned drawing | Slot width, thickness, hook opening and overall dimensions |
| Material specification | Required steel grade |
| Surface treatment | Coating type and any specified performance requirements |
| Load documentation | Rating, test method and product identification |
| Inspection requirements | Dimensions, finish and other agreed acceptance criteria |
| Traceability | Batch identification requirements, where applicable |
| Packaging | Quantity per carton and shipment protection |
Confirm which documents and inspection records can be supplied as part of the quotation. Any report used for approval should correspond to the relevant product and specification.
Bulk Orders and Custom Flat Hook Requirements
Contact An Thanh Tech to discuss bulk purchasing or a flat hook requirement based on your drawing or sample.
Custom dimensions, material grades, coatings, markings and packaging are subject to technical review. Minimum order quantities, sample arrangements and production schedules should be agreed before order confirmation.
To help prepare an accurate quotation, provide:
-
Product reference: drawing, sample photographs or existing part number.
-
Dimensions: webbing width, slot dimensions, hook opening and thickness.
-
Performance requirements: required rating and applicable testing requirements.
-
Material and finish: steel grade and coating specification, if defined.
-
Quantity: sample quantity, initial order and expected repeat demand.
-
Delivery details: destination country, postcode and requested schedule.
For repeat orders, reference the approved drawing revision to keep the product configuration consistent.
Frequently Asked Questions
What is a 75mm flat hook used for?
A 75mm flat hook connects webbing to a compatible anchor point in a cargo tie-down assembly. It is selected according to the strap dimensions, anchor geometry and required assembly performance.
Is a 75mm flat hook the same as a 3-inch flat hook?
“3-inch flat hook” is commonly used as a nominal product description in this category. However, 3 inches equals 76.2mm. Check the actual slot dimensions and intended webbing width on the drawing before treating two fittings as interchangeable.
Can a 75mm flat hook be used with 50mm webbing?
Do not assume it is compatible. Narrower webbing changes the fit within the slot. Select a fitting approved for the intended webbing and attachment design.
What is the breaking strength of this flat hook?
Breaking strength must be confirmed for the selected model. A 75mm size designation alone does not establish load capacity. Request the product specification and applicable supporting documentation.
Is breaking strength the same as working load limit?
No. Breaking strength describes failure strength under specified test conditions. Working load limit describes the permitted working load under the applicable rating conditions. Breaking strength must not be used as the allowable working load.
Can I request flat hooks made to my drawing?
Send your drawing or sample details to An Thanh for review. Available customization, sample requirements, minimum quantities and production timing will need to be confirmed for your project.
What information should I send to get a quotation?
Include the product drawing or reference, required rating, material and coating requirements, quantity and delivery destination. Identify whether you need individual hooks or complete tie-down assemblies.
Request a 75mm Flat Hook Quotation
Looking for a 75mm flat hook supplier in Vietnam? Contact An Thanh with your product specifications and purchasing requirements.
Send your drawing or sample photographs, required quantity and delivery destination. Include any load testing, coating or packaging requirements so they can be reviewed before quotation.
Email: cokhi.anthanhtech@gmail.com
Phone/WhatsApp/Zalo: (+84) 942 127 028
Headquarters & Factory: Ho Chi Minh City, Vietnam
View more